Scaffoldmart’s  7ft. Severe Duty All Aluminum Walkboard

                          1-11                $85.95 Free Freight over $600
         12-29                 $78.00 + Freight
         30-99                 $77.00 + Freight
    100-200                 $75.00 + Freight
        201-500   $69.00            Volume Repeat Buyers + Freight
        501-1000   $68.00           Volume Repeat Buyers + Freight
          1000+     $65.00           Volume Repeat Buyers + Freight
 

7' all aluminum board requires minimum order of $600 for free shipping.  Quantity breaks are FOB

10' all aluminum board requires minimum order of $600 for free shipping.  

Email Jerry at:    Jerry@Scaffoldmart.com  or Ransom atRansom@Scaffoldmart.com  Include your quantity and zip code.  They will get right back to you with a delivered to your door quote.  

Scaffoldmart's Severe Duty Premium 7 ft Solid Aluminum Walkboard

 

There is no comparison between our all alum board and others…….   Why?   We design all of our own products and our design for our all aluminum board has turned out above our expectations.   By carefully adding metal in all the right places (like the critical radiuses)…….we have engineered a walkboard that is ultra strong and extremely rigid.  It’s so strong we renamed it Severe Duty in following with our incredible alum/ply board which goes 11,000 lbs.    Our most recent load test with our latest design was eye popping.   How about 9195 lbs?......in the uniform load test.   Our older version went 5300 lbs.      That’s a mind numbing 212 lbs/sq/ft at the OSHA 4 to 1 safety ratio.   Compare this to others that rate at 75lbs/sq/ft and still others that rate their board at 50 lbs/sq/ft.    Ours is over 4 times stronger for less money!    We will put 75lbs/sq/ft on our label to be conservative….but you know the actual truth.   This helps add drastically to the safety margin.  And piece of mind.    Instead of a 4 to 1 safety factor you get as compared to those that rate at 50lbs/sq/ft ours comes in at a 17 to 1 safety factor!   What would you rather be standing on at height?    There is much less flex than you get in other competitive boards…….

 

View our latest test here.     http://www.scaffoldmart.com/PDF%20Documents/SCA021052082097001.pdf  Some of the superior features that make this better than similar but lesser boards are:

 

Almost every solid aluminum board has tri-shaped ribs on top as does ours.  The difference being a tool is used as the extrusion exits the mold while it's still hot that indents the tri-rib adding a series of traction grooves all along the board for absolutely superior boot traction.  This feature should not be taken lightly when using an all aluminum board when it's wet from rain or first thing in the morning with dew on the ground.

 

Our main I-beams are a full 2 mm thick.  The upper I-beam radius is generous.  More so than any other board we have seen or tested.  This adds major support for the top aluminum layer that you actually walk on.    Wind latch is standard on both ends.   Latch pivots in a swing pattern and prevents uplift in high wind conditions.    Rigidity also is gained from our slotted manufacturing process.  We designed a slot into the 2 main I beams.   One a male and one side a female so that they mate together perfectly.   This mated condition down the entire length of the board is superior to trying to bolt 2 large extrusions together in 3 places along the seam.   Our old design was bolted together and was squishy along the seam.