HD 5ft X 3ft Ladder Frame: $38.45

Backordered

Basic frame with 3 ft of height and 5 ft wide. Tube is 2.5 mm thick......which is .098 thick compared to most @ .90 or .95 in. Comes in 24 in or 27.75 pattern spacing. Please inquire as to current availibility regarding pattern. Has hi-vis yellow powdercoating and our recently enlarged flip locks. Increased size offers more leverage to go easy on the fingers.......also increases locks ability to not flip open. 26 lbs. 2 Stack pins and 2 spring rivets are included.
 

I             

 

             

 

 

 

5 X 5 Scaffold Frames:

$39.00

 

ScaffoldMart's most popular frame is the general purpose ladder type frame known as the 5x5 frame.

Our 5x5 frame measures 5' x 5' (1524mm H x 1524mm W x 42mm D x 2.3mm tube wall thickness). All frames are powder coated yellow.

The height is an actual 5' while the width is 5' from center of hole to center of hole across the top. This pattern is the most common in the industry.

We strive for compatibility, with the highest possible interchangeability with other patterns, because we want you to be able to switch to ScaffoldMart brand scaffolding as easily as possible. What determines scaffold stacking compatibility is tube size as well as interlock spacing. Again, the pattern we chose is derived from the most popular old-school patterns in the industry.

From the top view looking downward you will observe a rectangular pattern with 7' spacing from frame-to-frame and a width of 5' (as stated above the frames have a five-foot width).

Our tube size is 1.625" outer diameter, so check your pattern. As long as your pattern is 5' x 7' with the same tube size our pattern will stack with your pattern.

ScaffoldMart scaffolding also has an interlock spacing of 27.75" from center-of-stud to center-of-stud. This matches the most prevalent patterns in the industry as well.

Drilled holes are chamfered and internal slag is hand ground and removed to allow a perfect fit for ease of assembly and disassembly. ISO 9001 manufactured. We have built in as much quality as possible to give an unbeatable value. Please compare and we think you will agree.

We can conservatively rate this frame in a set at 13,500 lbs with a four-to-one safety margin. (See our scaffolding load test results here.) This means deflection or collapse occurs near or above 50,000 lbs, more than enough to support one or two men! Our frame includes a 9" Heavy Duty stack pin with an industry standard 1" collar and a spring rivet to hold the stack pin in place.

 

 

 

6.6 X 5 Scaffold Frames:

1-19 $45.50
20+ $41.00
 

We strive for compatibility, with the highest possible interchangeability with other patterns, because we want you to be able to switch to ScaffoldMart brand scaffolding as easily as possible. What determines scaffold stacking compatibility is tube size as well as interlock spacing. Again, the pattern we chose is derived from the most popular old-school patterns in the industry.

From the top view looking downward you will observe a rectangular pattern with 7' spacing from frame-to-frame and a width of 5' (as stated above the frames have a five-foot width).

Our tube size is 1.625" outer diameter, so check your pattern. As long as your pattern is 5' x 7' with the same tube size our pattern will stack with your pattern.

ScaffoldMart scaffolding also has an interlock spacing of 27.75" from center-of-stud to center-of-stud. This matches the most prevalent patterns in the industry as well.

Drilled holes are chamfered and internal slag is hand ground and removed to allow a perfect fit for ease of assembly and disassembly. ISO 9001 manufactured. We have built in as much quality as possible to give an unbeatable value. Please compare and we think you will agree.

We can conservatively rate this frame in a set at 13,500 lbs with a four-to-one safety margin. (See our scaffolding load test results here.) This means deflection or collapse occurs near or above 50,000 lbs, more than enough to support one or two men! Our frame includes a 9" Heavy Duty stack pin with an industry standard 1" collar and a spring rivet to hold the stack pin in place.

 

 

BILJAX STYLE HD WALKTHRU SCAFFOLD FRAME W/ BUILT IN LADDER 6.6 X 5: $55.99

This is a high quality walkthru frame with C-locks and yellow powdercoating. We have added a ladder to our walkthru pattern to give you the versatility of our walkthru frame and the ability of a ladder frame for climbing ease.  This allows you to build a long tower and walk end to end underneath but be able to climb with ease.  Brace pattern is 27.75 stud to stud same as standard BJ pattern. 2.3 mm tube thickness. Upper two locks are C-locks and we include a third lower flip lock so you can move the brace up or down. Move it high when you have a walkboard low on the ladder or move the cross brace low when you are using the board high. It's really nice to have this ability.........and you don't get that with braces on a 4 ft pattern. Weight 52 lbs. 2 Stack pins and 2 spring rivets are included.

 

             

 

The following are examples of having 3 locks and being able to move the brace high or low to allow the board to be moved up or down to help get it out of your way while working and to avoid interference between the board and brace. 

CLICK TO ENLARGE