ScaffoldMart's  Logo Toll Free
(866) 900-0983
Call Anytime
Boating Supply Division of ScaffoldMart





Scaffolding Products

Sets/Frames

BilJax Style Sets
BilJax Style Frames
Gadsden Style Frames
Safway Style Frames
Waco Style Frames
Veneer/Pedestal/Judy Jack
Multifunction Scaffolding

Most Popular Packages

Church & Stadium Scaffolding
5ft Tower Packages
11ft Tower Packages
14ft Tower Packages
16ft Tower Packages
20ft Tower Packages
26ft Tower Packages
30ft Tower Packages
34ft Tower Packages
3 x 3 Tower Packages
14ft & 20ft Tower Packages with Internal Stairs

Aluminum Scaffold Towers

Aluminum Scaffold Towers

Specialty Packages

2 x 3 Rolling/Stationary Tower
3 x 3 Mason's Walkthrough Tower
2 x 2 Rolling Tower
2 x 2 Stationary Tower
3 x 3 Tower packages

Internal Stair Tower Packages

7ft, 14ft, 20ft & 27ft Scaffold Tower Packages with Internal Stairs

Narrow Frame Packages

7ft Deluxe narrow Tower
13ft Deluxe Narrow Bakers Rolling Tower
19ft Scaffold Narrow Tower
Narrow Safety Rail System

Aluminum Extrusions

Aluminum Extrusions

Walk Boards-OSHA Plank

7ft/10ft All Aluminum Walk Board
7ft/10ft Aluminum/Plywood Walk Board
DI-65 Solid Wood Planks

Scaffold Sets

BilJax Style Basic 5ft x 5ft Scaffold Set
BilJax Style Standard 5ft x 5ft Scaffold Set
BilJax Style Premium 5ft x 5ft Scaffold Set
BilJax Style 5ft x 3ft Scaffold Set
BilJax Style 5ft x 6ft 4in Ladder Style
BilJax Style 5ft x 6ft 4in Standard Scaffold Walk-Through Set
BilJax Style 5ft x 6ft 6in Premium Scaffold Walk-Through Set
BilJax Style
5ft x 6ft 6in Walk-Through Set with Built in Ladder
BilJax Style Baker's Narrow Scaffold Set

Scaffold Frames

BilJax Style Basic 5ft X 5ft Frame
BilJax Style Standard 5ft X 5ft Frame
BilJax Style Premium 5ft X 5ft Frame
BilJax Style 5ft X 3ft Frame
BilJax Style 5 x 6ft 4in Ladder Frame
BilJax Style 5ft x 6ft 4in Walk-Through Frame
BilJax Style 5ft x 6ft 6in Walk-Through Frame
BilJax Style 5 x 6ft 6 in Walkthrough Frame with Built in Ladder
BilJax Style Baker's Narrow Ladder Frame

Accessories

Internal Stairs, ladders, gates
Scaffolding Jacks
Scaffolding Caster Wheel
Scaffold Pins, Clips and Stack Pins
Scaffold Grouser Bar
Scaffolding Cross Brace
Scaffolding Side/End Bracket
Swivel Couple/Fixed Couple
Scaffold Base Plate
5ft Deluxe Safety Panel
Scaffold Saddle Bracket
Hoist Arm Assembly

Safety Accessories

Scaffold Safety Rails, Poles, and Packages
Scaffold Deluxe Safety Packages, Panels, Rails, Toe Boards
Scaffold Safety Mid Post
Scaffold Safety End Panel
Mason's Safety Accessories
Scaffold Outrigger
Scaffold Tie Bar w/ Swivel Couple
Scaffold Safety Poles and Rails
Deluxe Double Safety Rail
Guard Rail Stanchion
BJ-Style Scaffolding Brace

Marine Products Division

Marine Products Main Page

Motor Boat Stands
Sail Boat Stands
Boat Stand Tops
Replacement Plywood for Boat Stands
Extra Large Foldable Sailboat Stands 8 to 15 ft
Keel Stands
Boat Tower Packages
Boat Scaffolding
Boat Ladders
Hurricane Cradles
Hot Dip Safety Chain
Wood Keel Blocks
Plastic Soft Gel Tops
Outboard Motor Rack
Boat Lift Trailer Removal System
Boat Dolly
Boat Rack
Wedge Stand
Boat/Yacht
Stair Unit
Stern Drive Rack
Stern Drive Installation Jack
Sailboat Mast Dolly

Shopping/Grocery Carts Division


Specialty Items

Tent Dolly

Safety and Set Up

OSHA Safety Standards
Set Up Instructions

Dollies
Boat/Pontoon/Jet Ski

Dealer Discount 30% 

 

 

Scaffoldmart's Boat Dolly

 

 

Model M3500  Boat Dolly

Boat Dolly
3500 lbs capacity

Dimensions are 23.5 W x 39 L.   Pad height adjustment 13 in to 18 in.   Pad width adjustment either 31 in or 38 in.

Our regular duty boat dolly has all the same features as her heavy duty brother.   Same hydraulically pressed V rib.    Just a smaller pad and female holder assembly.   We use a poly wood type of material for the pads which are non marring and do not require maintenance.   Compare to a wood pad with carpet stapled around it……the carpet falls off, gets wet and the wood rots……All of that is eliminated with a Rubber pad head……  

Model M6700 Boat Dolly

Boat Dolly
6700 lbs capacity

Our Heavy Duty boat dolly comes with high quality non-marking casters and non-marking poly pad heads.   Most manufacturers cut the V rib is 2 or more pieces and splice them together by welding.   We think that hydraulically forming the V rib where the bottom and the top are pressed into a shape that has a radius on both sides is just a higher quality way to do this.   It’s a much higher quality way to manufacture a dolly.    So we took the time and expense to have the V ribs hydraulically pressed for strength and rigidity…..not welded like most.   This means you have to have a mould made to do this which is initially quite expensive.   But once it’s done the V is actually cheaper to produce over the long run.   Two adjustment positions for the pad head.  This helps you be able to miss a strake.

Dimensions:  25.5 in W x 41 in L x 10 in H.  Clearance is 3.5 in from top of carriage to lower “V” center.   Pad is 12 in x 5.5 in x 1.5 in.   Pad adjustment is 17 in to 25 in min to max height.    Pad stem installed has 2 different widths.   29.5 in and 40 in.

Poly pad is the ultimate compared to wood with carpet………No Wood Rot EVER!    

 

 

 

 

Pontoon Dolly

Dimensions: All Approximations

Total Weight: 52 lbs

Width: 22"

Length: 25"

Load capacity is 1600 lbs with a 2.5 to 1 Safety Ratio
 
 

Our Pontoon dollies have been designed to "stack" for reduced shipping charges.

 

Jet Ski Dolly

Dimensions: All Approximations

Total Weight: 73 lbs. (29 lb. base, 12 lb. bunks, 5 lb. wheels)

Width: 36”

Length: 48”

Bunk Length: 55”

Bunk Width: 4”

Protective Plastic Mount Thickness: 1”

Height of Jet Ski on Unit: 15” 

Scaffoldmart’s Jet Ski Dolly comes disassembled in seven pieces: a base (29 lbs.) , two bunks (12 lbs. each), and four wheels (five lbs. each); it weighs a total of 73 lbs. It features an approximately 1” thick protective plastic insert on its bunks for scratch resistance. The bunks can be adjusted from 6” close all the way out to 30” apart. Its bunks can turn to accommodate any angle (they can rest completely vertical in one direction and also around to completely vertical in the other). The frame of its base is 36”x48”, meaning it can roll through a door as narrow as 36”. Our dolly utilizes a hand tightened screw lock to secure the bunks the proper distance from one another with ease. The 6” casters turn 360 degrees effortlessly, making for great maneuverability under load. When resting on the bunks, a jet ski would be positioned approximately 15” off of the ground. All numbers are close approximations, stay tuned for load test results.

 

 

 

Certifications
click to enlarge

View Your Cart
View Cart
 
Checkout  

Boat Dolly M3500
Price: $244.00
Quantity

Add to cart

Boat Dolly M6700
Price: $373.00
Quantity

Add to cart

Pontoon Dolly
Price: $129.00
Quantity

Add to cart

Jet Ski Dolly
Price: $199.00
Quantity

Add to cart

 

[ Home ]    [ Scaffold Certification ]    [ Shipping Info ]    [ Large Accounts ]    [ Sitemap ]    [ Contact Us ]    [ Frequently Asked Questions ]    [Scaffolding]    [Grocery Shopping Carts]

 site map xml file