Scaffolding Level Jacks 1.375 in OD, 23.5" high
(fits regular #6 tube)
$10.90 Plus Freight
300 + $9.90
Jacks are necessary outside or anytime you have uneven ground. A level jack is
a large threaded rod with a wing nut and a welded steel plate called a base
plate on the bottom. Level jacks are a must for a safe, stable, level work
platform. Our jack is 24 inches in height which allows an adjustable range of
18 total inches.
This allows you to locate a platform where it might otherwise be impossible. At
six inches height, load rating is 13,013 lbs with a 4-to-1 safety margin. At 18
inches the safe load rating is 8,838 lbs with a 4-to-1 safety margin. See our
scaffolding load test results here.
Scaffoldmart carries only a solid-steel scaffold jack, not a hollow jack like
some other companies.
Our wing nut is huge. It’s almost 9.5 in in length. The longer the nut the
easier it is to adjust it under load. We use precision square top acme threads
so you can spin the nut and it spins for several seconds which shows the
precision mating we have achieved with our jack. This is how we define
quality. Finally it’s hard to have a precision thread and hot dip it because
the thickness of the zinc interferes with the precision thread. But we do
cold zinc our jacks.
If you need to work on unleveled ground or an unleveled rooftop consider
Scaffoldmart's swivel jacks. They are very handy for working around a chimney
where the roof. They are 24 inches in total length. The actual adjustment range
is 18 inches of upward adjustment. CLICK
Scaffolding Level Jacks 1.25 in Outer Diameter (fits #5 tube):
11 pounds each
Zip of origin 27834
Click pictures to enlarge