**This package includes free shipping
in the continental USA. Order by 10 AM EST and your package will be shipped out
that same day! **
Scaffoldmart's 19 ft Deluxe Narrow Rolling
Package. We have configured this package for an extra margin of safety. Since
it's very narrow at 28 inches we have decided that our jumbo outriggers are more
appropriate to include with this package. Stability at height is determined by
the width of your base. Since we are dealing with such a narrow base we think
that our regular 30 inch outrigger is way too inadequate. It meets OSHA code but
we don't personally feel comfortable up there so we didn't think you would
either. But when you add our jumbo outrigger which is a full 5 feet and you get
one for all 4 corners of the tower now that's a different matter. This increases
the base width to a 12 ft 4 inches. Huge! These outriggers come with 5 cast iron
clamps to clamp tightly to the tube. The outrigger angle can be adjusted so that
you have maximum width when moving the tower or when you are in an wide open
area. When you need to get in a hallway that's narrow the outrigger can be
collapsed downward by adjusting the angle of attachment of the outrigger. This
will allow you to get in a very tight narrow space but still have the outriggers
deployed.
We have a deluxe rail system included as seen here http://www.scaffoldmart.com/deluxe-safety-guard-panel.html
that's fits our narrow packages. It looks exactly the same but instead of being
5 ft wide it fits the 28 inch width of this narrow package. It includes a fully
welded one piece end panel that has a steel toe board that's height adjustable
and a predrilled U shaped bracket for a side toe board which we suggest be done
out of wood for cost savings. A safety chain allows you to enter and exit with
ease and then when rehooked upon entry allows the OSHA knee rail rule to be
complied with. The side rails are 7 ft in length and have 2 welded ribs to
produce a one piece unit. One piece units are rigid and make you feel warm and
fuzzy at height. That is to say they are rock solid and give a feeling of
security.
The rail in this package has a frame that allows you to place the walkboard at
12 inch intervals. This allows you to adjust the standing height to the perfect
position all the way from the very bottom to the very top. This package can also
be used at the 6 ft height or 12 ft height. Included in a narrow grouser bar for
stability at the bottom and the entire tower is locked together from top to
bottom. The width of these frames when broken down allows you to carry them with
ease up say an apartment stair then reassemble them. The broken down dimension
is 28 inches x 6 ft and is very easy to carry.
4 ScaffoldMart Caster Jacks This scaffolding jack fits between the scaffold frame and the scaffolding
caster and allows for height adjustment upwards for approximately 18 inches. To
see this item
CLICK HERE
4 Regular Level Jacks:
Add an extra set of jacks for use outside.
CLICK HERE
