7' Deluxe Ladder Rolling Scaffolding Tower:
$548.00
Plus Freight
A specialty tower for hard-to-reach areas that
are too narrow for a regular tower to fit. Also perfect for someone who wants
better portability; for example; someone who constantly carries this tower
upstairs in a business, factory, industrial or city environment or apartment
complex. These frames are narrower and easier to carry up many flights of
stairs. No part weighs over 50 lbs.
This is a narrow scaffolding tower, but it's not light duty. The same super
heavy duty frames are employed as in our regular scaffolding frames.
When scaffolding was load tested a set collapsed at 60,000 lbs; however, we rate
it at 3,750 lbs per scaffold set for safety. That's a safety factor of 16 to 1
where OSHA requires only 4 to 1.
This tower's standing height, or where your feet rest, is 6ft 8 inches to be
absolutely exact.
A special narrow deluxe safety end panel adds security on the top. This is a one
piece panel which slides over the stack pins and since it's a one piece it's
very sturdy. No wobble. Then we add ribs on the side rails which are welded
making the side rail a one piece unit as well. Once assembled you have an
awesome rail system that extremely rigid. Panels include adjustable toe boards
via a u-bolt that can be loosened and the height of the panel adjusted up or
down to match the standing height. A safety chain on the panel allows entry and
exit. It's very nice.
This package includes a 7' x 19.25" alum/ply walkboard.
Wheels are our 8 inch industrial ones that roll very easily as opposed to the
cheap 5 inch casters on most light duty multifunction scaffold.
Dimensions are 7 ft length x 24 inches wide x 6ft 8 inches high. Weight is 365
lbs including pallet.
The complete set includes the following:
2 narrow ladder frames 6 ft x 26.5 inches, powder coated yellow upgraded C-locks
2 cross braces, galvanized
4 stack pins
4 spring rivets
1 19.25" x 7' alum/ply walkboard
4 wheels
2 narrow deluxe safety panels
2 7 ft double-galvanized safety brackets
8 pigtails
1 Grouser bar 7x 28"
Accessories to Consider
4 ScaffoldMart Caster Jacks $72 This scaffolding jack fits between the scaffold frame and the scaffolding
caster and allows for height adjustment upwards for approximately 18 inches. To
see this item
CLICK HERE
4 Regular Level Jacks: $57.96
Add an extra set of jacks for use outside.
CLICK HERE
