|
| ||||||||||||||
| Home |
|
Certification |
|
Shipping Info |
|
Large Accounts |
|
Contact |
|
Testimonials |
|
|
||
The Best Pricing
|
|
Scaffolding Brace: 7ft $13.50 10ft $17.50Scaffoldmart's Scaffolding Brace is a tubular 2248 mm L x 25 mm D x 1.7 mm tube-wall thickness.The ends are hydraulically flattened and a hole punched at exactly 88.75 inches center-of-hole to center-of-hole. The brace is then riveted in the center and is fully galvanized for a rust-resistant final finish. Our scaffold brace fits a stud spacing of 27.75 inches center-of-stud to center-of-stud on the frame, yielding a 7 Ft frame-to-frame spacing, the Biljax style industry scaffold standard which has over 1000 dealers in the USA. Please don't assume our brace will match your frame pattern. Please measure it. Your stud will need to be exactly 27.75 inches center to center from each stud. Then our 7 ft and 10 ft braces will yield the correct 7 ft and 10 ft spacing. We cannot be responsible if you order without measuring. 12 lbs each 10 ft Brace: This allows the frame to be increased from a 7ft center of tube spacing to a 10ft center of tube spacing and is 27.75 inches from stud to stud. Measure before ordering if you are not ordering our frames. 17 lbs each. Shipping Information: 7 ft 12 Pounds each Shipping depends on quantity. Over $600 and its free shipping. |
|
Click for large image |
||||||
|
| ||||||||||
|
[ Home ] [ Scaffold Certification ] [ Shipping Info ] [ Large Accounts ] [ Sitemap ] [ Contact Us ] [ Frequently Asked Questions ] [Scaffolding] | ||||||||||