ScaffoldMart.com's Scaffolding Caster Jacks
Our caster jacks come in two distinct models. The first is size 1.375" OD (# 6 tube) and fit's almost all our scaffolding frames. The second fit's our square-tube multifunction system, and as far as we know we are the only company in the world who carries such a product. Here you will find general information on our caster jacks. If you know what you need you can select your desired quantity in the table below and click "Add to cart." For more specific technical data on either product, click it's name in the table.
Scaffoldmart's level jack for use with a wheel or caster.
This scaffolding jack fits between the scaffold frame and the scaffolding caster and allows for height adjustment upwards for approximately 18 inches.
Construction is very heavy duty. Galvanized or zinc coated completely (same thing). A hole is predrilled to pin the caster. Dent in the upper thread to prevent losing the wing nut.
Use this jack when you want to use your wheels but the surface is uneven. When your tower is erected it's very difficult to move around without casters. If the surface is uneven jacks become almost a necessity.
These scaffold caster jacks also allow for an adjustment of the standing height of the tower if you want to fine tune the exact position for optimum work conditions.
It's so nice when you get the right piece of equipment for the right job!
OUR VIDEO ON THE BENEFITS OF SCAFFOLDING JACKS
Video may reference free freight. We have removed built-in freight and lowered pricing drastically. All orders are now “plus freight.”