Aluminum Scaffolding

Looking for the best tower solution? It’s probably aluminum. The tradeoff is aluminum is more expensive than steel. If you are looking for a rock solid solution at height then aluminum is your answer. If you are looking for a light weight frame consider that a 5 ft 6 in aluminum scaffold frame weighs about ½ that of a steel scaffold frame. 17.5 lbs (Alum) vs 33 lbs (steel). We have aluminum scaffold towers from 12 ft all the way up to 34 ft listed on the website. In addition we can custom configure solutions that reach as high as 58 ft in a double wide configuration. About low 30’s on the narrow span. Braces snap into place and are rock solid. Standing on these are like “standing on the ground at height”. 12 yr warranty on all cold formed joints. Pattern match for Werner/Upright. Available in 6 ft, 8 ft and 10 ft lengths. Standard base frames are just a tad over 6 ft high. Available upper frames are available in 4 ft, 5 ft 6 in, and 6 ft 9 in heights. We recommend the 5 ft 6 in frame as the best all around for building your project and we have configured all the towers with this frame. It’s easy and light to hoist up and install. We double brace our higher narrow span towers (over 24 ft) for rigidity. Each narrow tower comes with 1- 22 in wide walkboard with hatch but several are recommended to assist you when building upwards. All Narrow/Single Span towers are configured with a walkboard with hatch. Double span or wide towers include 1 walkboard with hatch and one solid walkboard.

Options include all aluminum walk boards both solid and with a hatch. Also collapsible base sets and stairways base sets. Call us to discuss.

Your order may need to be built depending on stock so check with us on time needed for this.


Our Scaffold’s computer numeric controlled manufacturing process insures precise specifications on all frames and components. We use aircraft grade drawn aluminum tubing with solid castings on all frames. This combined with our exclusive hydraulically cold formed “Sure Grip” joint creates the strongest frame available (test results available upon request)

Our Aluminum Scaffold and components are manufactured to fit most competitive brands including Upright and Werner or can be manufactured to meet your own specifications. All Span Scaffolds meet or exceed the requirements of O.S.H.A. and A.N.S.I.

Our Span Scaffold in an Instant is the most versatile of all aluminum scaffolds that can be used in many applications including aircraft maintenance or used on stairways. Rolling Towers can be quickly and safely erected up to 44 feet with no tools required. Multiple spans can be combined to form complex multi-leveled stages and stands only limited by your imagination.

The Span Scaffold is available in single wide (29") or double-wide (54") and platform lengths of six, eight and ten feet. Base sets offer 12" of rapid adjustment and 5" or 8"non-mark casters with exclusive “Positive Lock” and a knurled nut for fine leg adjustments.