SBS0 w/ Long Top 79"-96"
Nests and Interchangable with Brownell Pattern (Rusty) Boat Stands
- (1) SBS0 Galvanized Base
- (1) Orange Galvanized Long Top
Miss our Salt Water Corossion Comparison? Click the link in the preceding sentence.
Yep, Scaffoldmart now manufactures boat or yacht stands for motorboats or sailboats. Getting straight to the point, our pattern matches the industry leader at about 60% less money. Same high quality, exact same pattern, same part number for yards or marinas that already have stock and are used to the MB-0 or SB-3.
We are boaters ourselves and have had some big old hair pulling projects. Upon trying to locate a set locally we discovered the local yards wanted an arm and a leg for a set of old used rusty stands. It was unbelievable that they wanted $160 each for six stands which totaled $960.
I looked in disbelief at them as I know what we sell our famous scaffold sets for daily! We looked at them and thought they are basically the same as our scaffold frames.
Thus Scaffoldmart's Galvanized Boat Stands were born. Now, we appreciate a high quality stand, but that was just too much. So we took a look and did a little figuring and decided we could offer the same high product quality for roughly 60% less.
We have tried to offer the exact same pattern in the point you cannot tell them apart. Marinas have lots of stock and you definitely want to match your pattern. A marina/yard doesn't have the time to find four of the same pattern and now you can save HUGE and get the exact same pattern. So it doesn't matter if you have two of our MBS-2's and two of your old stock. They are the same height. We do this daily as we are experts at it with many scaffold patterns.
You have stock and want to add to your pattern but you are locked into buying from the OEM source and of course paying way too much to maintain that match. Now you have a choice. We equip each stand with an orange plywood top just like the original, a fully hot-dipped zinc base versus blue paint, fully coated inside and outside, a cold galvanized top as opposed to the original which is just bare steel and heavily greased and I can tell you very messy! Every time you try to adjust the height your hands get grease all over them. Cold galvanizing is a better choice for bare steel as opposed to hot dipping as it doesn't overly coat our SOLID ultra-precision Acme threads so the nut "fits," and is easy to turn. It will spin four to ten seconds in your hand. We used a high precision Acme thread to achieve this. Back to cold galvanized. What it does do is it stops rust for a long time. What you get with this is no coating on the top. After doing a bit of reading we discovered that the original is vat dipped in paint in a basket then spun to remove excess paint? Isthis to thin down the coat and save paint. Don't hold us to that but we think that's accurate. Paint dipped is nice and coats the inside which is just as important as the outside but since many yards/marinas/customers are located near salt water it only made sense to us to do our base in hot-dipped galvanized only. I don't want to buy a painted-blue base for myself and figured you wouldn't either if you could get hot dipped for a reasonable price. That means dropping the base into a vat of very hot molten zinc. The zinc bonds to the steel and sacrifices itself protecting the steel. This means no more rust. We won't offer the base with blue paint. They just rust too quickly. So we are offering our stands with a hot dipped base for less than their painted base. Plus a galvanized top. Theirs is bare steel!
CEO, ScaffoldMart.com (MarineMart)